Technical specifications

Follow us:


Touch foil


  • -
    		•  Size: Varying between 30 inch and 116 inch in the ratio 4:3 and 16:9
  • -
    		•  Installation: Permanent installation and removable (Re-usable)
  • -
    		•  Sensitivity: Programmable for different thicknesses of glass.
    Single glass up to 16mm
    Double glass up to 25mm
  • -
    		•  Accuracy: About 3mm absolute and 1 relative, no drift.
  • -
    		•  Touch: Single touch with drag and drop possibilities, is usable with gloves.
  • -
    		•  Reaction: Varying between different thicknesses, average about 50ms and 100ms.
  • -
    		•  Temperature: Best used between -10 and +70 degrees Celsius
  • -
    		•  Humidity range: 0% to 95%, not affected by moisture.
  • -
    		•  Light: brings over an average of 93% light.
  • -
    		•  Output: RS232C Communications to a 9 pin D female.
    USB through a USB to RS232C converter.
  • -
    		•  Drivers: MS windows
    Mac osx: third party
    Linux: CentOs en Red Hat

    For more information about this product: Click here*available soon*

    Interactive products: iFloor/iWindow/iBar/iWall


    The systems use only a few parts: a PC, a Beamer, A camera and if wanted possible some external devices.
  • -
    		•  Energy use PC: This differce per system, an average is around 0,4kWh an hour.
  • -
    		•  Energy use Beamer: The beamers have different light sensitivities which results in a different use of power, this lies between 0,220kWh to 0,305kWh an hour.
  • -
    		•  Energy use external devices: This differce from client to client, think of music boxes to extra lighting in dark rooms.
    The Total power use of out systems relies on what the client whishes: how many projection are wanted and how much external devices are used. So the complete picture depens on the client wishes.

    All systems need at least 1 connection to a power source through a socket.

    The control over the devices go through a cordless keyboard, the interface is the same as the operating system running on the system. Vision2Watch will always make sure the product is easy to handle and everything necessary is found with the click of a button.

    The installation of the product depends on the location, Vision2Watch can provide a few different options: We can place the devises in walls or ceilings, on top of our own trusts or be installed on existing beams. Of course Vision2Watch will always come up with a creative solution for every location.

    For more information about angels, sizes, projection lighting see the following articles:
  • -
    		•  iFloor *available soon*
  • -
    		•  iWindow *available soon*
  • -
    		•  iBar *available soon*
  • -
    		•  iWall *available soon*

    Holographic projection.


    *available soon*

    Auto-Frost glas


  • -
    		•  transparent under voltage: non-transparent without voltage.
  • -
    		•  More than 75% transparent under voltage and less than 6% see through without voltage.
  • -
    		•  Response time with switching:
    Transparent to non-transparent about 0,02 seconds.
    Non-transparent to transparent about 0.10 seconds.
  • -
    		•  4. Maximum sizes: 1200mm width x 3000mm height x 0,7 mm thick.
  • -
    		•  Temperature reach from -20 to +75 degrees Celsius.
  • -
    		•  Voltage: around 110V (50/60Hz).
  • -
    		•  Usage: around 8W/m2.
  • -
    		•  Lifespan: continues transparent (with voltage) more than 50,000 hours.
  • -
    		•  Switch on to off, usable more than 3.000.000 times.
  • -
    		•  Stops 99% UV light.
  • -
    		•  Stops 65% heat radiation.
  • -
    		•  Consist of: PET (Polyethyleentereftalaat) completely recyclable.